Weir

Founded in 1871, Weir is an international engineering company, dedicated to creating engineering solutions that improve the quality, safety and value of their customers’ activities. Weir operates 3 divisions, Weir Minerals, Weir Oil and Gas, and Weir Power and Industrial, with each division operating leading brand name products.

With a reputation based on engineered excellence, Weir is well known for their dependability and efficiency across a range of specialist applications and products. They have an international presence across a range of industries, including mining, general industry, waste and waste water, nuclear and defense industries.

Malcolm Thompson Pumps is proud to be the exclusive Australian distributor of the Weir Self-Primer (WSP). The support of a global company, combined with the experience and knowledge of Malcolm Thompson Pumps, ensures that the WSP Sets New Standards in the Australian pump industry.

Aquaplus Pumps

Aquaplus pumps are high quality industrial pumps designed for use in a diverse range of Australian and international industries including mining, construction, water, sewerage & wastewater, agriculture, petro-chemical, industrial, food & beverage and manufacturing.

The Aquaplus pump range includes End Suction Pumps, Transfer Pumps, In-Line Centrifugal Pumps, Split Case Pumps, Magnetic Drive Pumps, Air Operated Diaphragm Pumps, Peristaltic Pumps, Progressive Cavity Pumps, Pressure Systems and Flexible Rising Mains.

Malcolm Thompson Pumps is proud to be an exclusive distributor of Aquaplus pumps.

Tsurumi Pump

Tsurumi is one of the largest manufacturers of submersible pumping equipment in the world. Established in 1924, Tsurumi has played an active role in the development of advanced water supply and sewerage systems for major cities around the world.

Australia’s market leader in small sump drainage, construction dewatering, sewage cutter and grinder pumps, Tsurumi serves a large range of industries with dependable submersible pumps and wastewater equipment.

Malcolm Thompson Pumps is proud to have been the exclusive Australian distributor for Tsurumi’s entire submersible pump range for over 35 years.

Grundfos Pumps

Grundfos was established in 1945 by the late Poul Due Jensen, with the aim of becoming the worlds leading and most successful pump manufacturer. Today, Grundfos is the world’s largest manufacturer of circulator pumps, covering approximately 50 per cent of the world market for these pumps.

Grundfos is continually striving to introduce outstanding new pumps and pumping systems that satisfy the markets’ needs for effective, reliable, energy-efficient solutions. The Grundfos pump range includes pumps suitable for domestic, municipal and industrial applications.

Malcolm Thompson Pumps is proud to be an Authorised Australian Distributor of Grundfos pumps. We stock a full range of Grundfos pumps, spare parts and accessories. Malcolm Thompson Pumps branches are also authorised Grundfos pump service centres.

Sakuragawa

Sakuragawa Pump Mfg. Co Ltd, established in 1953, is a dedicated pump manufacturer based in Osaka Japan. Sakuragawa is proud to be the first submersible pump manufacturer in Japan.

As a company with leading technical and development skill, Sakuragawa continues to offer the best pump products and services to consumers today as they have done in the past.

Sakuragawa’s broad product range includes submersible pumps for civil engineering, construction, mining and marine applications.

As a proud supplier of Sakuragawa pumps, Malcolm Thompson Pumps has all your submersible pump needs completely covered.

Varisco

Varisco, based in Padua Italy, started as a family company in 1932 and began producing pumps in 1948. Today Varisco is part of an international group and has become a household name around the world, known for its reliable pumps for difficult applications.

Varisco specialises in self-priming centrifugal pumps for liquids with solids in suspension and positive displacement pumps for liquids of all viscosities. The Varisco range also includes automatic fire-fighting pumps for hoses and sprinkler systems and submersible pumps for drainage and dredging.

Servicing the Industrial and Civil Engineering and Safety markets, Varisco has extensive experience in solving problems with difficult liquids around the world.

Malcolm Thompson Pumps is proud to be the exclusive distributor of Varisco pumps in Australia.

Nossiter

The Nossiter brand of pumps are specialist pumps built specifically for fire protection and hydraulic services in high and low rise buildings.

These individually tailored package pump systems, comprising of pumps, controls, wiring and auxiliary items are designed to suit any given project and are commissioned on-site by Malcolm Thompson Pumps’ trained service technicians for all fire protection and plumbing purposes.

Malcolm Thompson Pumps is proud to continue the work started by Nossiter Pump Services in building the highest quality Nossiter Pump Packages for the Fire and Building Services industries.

ProMinent

With headquarters located in Heidelberg, Germany, the ProMinent Group has been in operation since 1960. ProMinent is your reliable solutions partner for water treatment and a manufacturer of components and systems for chemical fluid handling.

The Australian based ProMinent Fluid Controls, has been operating since 1976 and is focused on the manufacture and supply of Chemical Dosing and Water Treatment Systems, Progressive Cavity Pumps and associated equipment.

Malcolm Thompson Pumps is a proud distributor of ProMinent Chemical Dosing Pumps and Water Treatment Packages.

Flux

FLUX based in Stuttgart Germany, is the recognised leader in drum and container transfer pump technology. In operation for over 50 years, FLUX was the first German company to manufacture barrel pumps according to its own patented designs.

All FLUX products are designed and manufactured to exact specifications. FLUX provides the right solution for every type of liquid movement and every industry. FLUX technology is more sought-after than ever before. Be it an individual pump or a complete system, FLUX quality stands for extended service life, excellent cost-efficiency and the highest degree of safety.

Malcolm Thompson Pumps is proud to be the exclusive Australian distributor of all FLUX pump types.

Inoxpa

Inoxpa, founded in Banyoles, Spain in 1974, is a leading pump manufacturing company with a global distribution network. Inoxpa specialises in manufacturing sanitary pumps for the food-processing, wine making, olive oil, pharmaceutical and cosmetics industries.

Inoxpa is dedicated to providing its customers with superior pump products. With excellent raw materials, finishes, officially approved and certified systems, and well tried technologies; Inxopa offers pumping solutions through service and adaptation of each product to customers’ requirements.

As a distributor of Inoxpa pumps, Malcolm Thompson Pumps delivers a full range of Sanitary Centrifugal Pumps, Sanitary Rotary Lobe Pumps and Sanitary Helicoidal Pumps.

Pacer Pumps

Pacer Pumps was founded in 1974 and is the leading name for plastic, lightweight, low-cost self-priming centrifugal pumps world wide. Pacer pumps are molded from tough modern thermoplastics for handling corrosive liquids. Successful adaptation of these products for industrial, agricultural, oilfield, marine and construction applications has resulted in worldwide market acceptance.

As the exclusive Australian distributor for Pacer Pumps, Malcolm Thompson Pumps is able to provide the entire Pacer range. This range includes transfer and trash pumps, end suction pumps, magnetic pumps, electric driven, close coupled pumps and drum pumps. At Malcolm Thompson Pumps we specialise in Pacer’s Transfer and Trash Pumps.

Indeng Monoflo

Gillies Metaltech, manufacturer of Indeng pumps, is based in New Zealand and manufactures reliable and efficient single-stage end suction centrifugal pumps. The simple construction of the pumps ensures ease of installation and maintenance with all parts manufactured to close tolerances to give interchangeability.

Malcolm Thompson Pumps is proud to be the sole Australian distributor for the Indeng Monoflo and Motoflo ranges.

Toyo

TOYO is a specialist manufacturer of heavy duty electro submersibles with hard iron pump components and built-in agitator systems. Renowned for quality, Toyo pumps are specifically designed for applications where abrasive and heavy duty slurries are encountered.

Where there is a requirement to move dirty water and heavy slurries, Toyo will be the first choice for many. With 60 years of pump design, manufacturing and feedback received from tens of thousands of applications, Toyo has become the leader in wear resistant submersible agitator pumps.

As the exclusive Australian distributor for Toyo for close to 20 years, Malcolm Thompson Pumps is able to provide the entire Toyo range, while specialising in the distribution of Toyo’s slurry pump range.

CAT PUMPS

CAT PUMPS is a world leader in Positive Displacement Triplex Reciprocating Pumps. They offer solutions to meet the demands of most high pressure pumping systems. Their high quality components, exceptionally long lasting seals and field-proven dependability have made CAT PUMPS the choice where continuous-duty performance and low-maintenance are priorities.

As a CAT PUMPS distributor, Malcolm Thompson Pumps  has over 30 years experience with CAT PUMPS, resulting in the provision of superior advice and recommendations in the design of CAT PUMP systems.

Wernert

Wernert was founded by Karl Wernert in Mülheim an der Ruhr Germany, in 1920. Wernert is now a truly global company, with distributors located around the world. Wernert specialises in centrifugal pumps made from non-metal materials. These pumps are used for handling problematic fluids, including aggressive, abrasive or toxic media.

Wernerts’ plastic pumps made from materials (UHMW-PE, PVDF or PTFE) and satisfy the highest security and quality specifications, including ATEX.

Wernert has a long standing tradition of being highly innovative, with the first centrifugal pump made from plastics in the world launched by Wernert as early as 1927. Innovation continues today with the leading Wernert pumps, including the world-wide most advanced pump concept TIAFUN.

Malcolm Thompson Pumps is proud to be the exclusive Australian distributor of Wernert Pumps, supplying a full range of Wernert Plastic Chemical Transfer Pumps.

Environment One Corporation (EOne) is a diversified, high technology company based in the USA. EOnes business activities are comprised of two key areas :

Utility Systems
EOne’s expertise in the detection and measurement of submicron particles has led to the development of a line of critical monitoring instruments for electric utilities.

Pressure Sewer Systems
Low pressure, gravity independent, contour-following sewage collection systems were pioneered by EOne. EOne sewer systems currently serve over 500,000 end users daily.

Malcolm Thompson Pumps is the distributor of EOne Pressure Sewer Systems in NSW, QLD, VIC, TAS and SA.

CDR

CDR Pompe S.p.A is a family owned pump company, based in Milan Italy. CDR Pompe is an industry leader in the manufacture of single-stage centrifugal pumps for the chemical process and pharmaceutical industries. For over 40 years, CDR Pompe has been manufacturing magnetic drive pumps specialising in handling corrosive liquids for industrial applications where environmental and operator safety are of prime importance.

At CDR Pompe almost the entire pump range has been extended to comply with Atex 100a regulations for maximum safety in potentially explosive atmospheres. CDR Pompe S.p.A is also ISO 9001:2000 Certified.

Malcolm Thompson Pumps is a proud distributor of CDR magnetic drive pumps in Australia.

Egger

Emile EGGER & Co SA, established in 1947 is an independent family run pump company specialising in the manufacture of centrifugal pumps. Located in Cressier Switzerland, EGGER pump’s specialises in pumping slurries, aerated liquids and liquids at high temperatures and pressures.

All EGGER manufactured pumps are of the highest quality and hydraulically tested to internationally recognised standards.

Malcolm Thompson Pumps is proud to be the exclusive distributor of Egger End Suction Centrifugal pumps in Australia.

Lawrence

For over 70 years, Lawrence Pumps, located in Massachusetts USA, has been an industry leader in the design and manufacture of engineered centrifugal pumps for industrial services. Today, Lawrence pumps design and produce rugged industrial pumps for the petroleum refining, petro chemicals, pulp & paper and energy markets.

Laurence pumps are built to provide durable, environmentally friendly equipment solutions that have both high reliability and low life cycle cost.

Lawrence Pumps’ world class engineering, materials management and manufacturing team operates from an 11,600sq meter modern facility and through a global network of sales and service offices to provide equipment solutions for our industrial clients.

Malcolm Thompson Pumps is proud to be the exclusive distributor of Lawrence specialised centrifugal pumps in Australia.

Harben

The Harben product range is manufactured in the UK by Flowplant Group who is one of the World’s major suppliers of high pressure water jetting equipment with 40 years experience in this field.

As well as Harben, other companies in the group include:

• Aqua Hydraulics - Ultra High Pressure pumps to 2,500 Bar (36,000 psi)
• Neolith Pumps - U.H.P. pumps and chemicals, specialising in Hydro Demolition
• Martin J Storey - Smaller Contractor Sewer cleaning machines up to 210 Bar.
• ARB Manufacturing - Specialist in detail machining and metal fabrication.

The Harben Division are specialists in Sewer Cleaning with this area accounting for approximately 60 % of their turnover. Their product range includes Trailer, Van Pack and Truck mounted machines within the pressure range from 210 to 700 bar (3000 to 10,000 psi) and up to 155 L/Min in flow.

Abel

ABEL GmbH & Co.KG was established in 1947 in Dusseldorf, Germany. The company specialises in the manufacture and sale of positive displacement pumps and is a worldwide supplier of diaphragm, solids handling, high pressure and marine pumps to a variety of industries.

All ABEL products are individually tested on production test facilities, ensuring the highest possible quality. ABEL adopted the DIN EN ISO 9001:2000 Quality Management Standard in 1991.

Malcolm Thompson Pumps is proud to be the exclusive distributor for Able pumps in Australia.

Edur

Based in Germany, EDUR-Pumpenfabrik have been manufacturing centrifugal pumps for handling liquids containing solid particles, liquid-gas mixtures and liquid ring vacuum pumps for gases since 1927. Edur offers pumps for a wide spectrum of applications for water supply, energy technology, cooling towers, refrigeration and chilling, wastewater treatment and marine applications.

As an Edur distributor for over 55 years, Malcolm Thompson Pumps specialises in the distribution of Edur’s Multiphase Pump range.

JS Maskinfabrik A-S

JS Maskinfabrik is a leading manufacturer of positive displacement pumping equipment for difficult to move liquids that contain a high percentage of solids. The company was founded in Denmark in 1982 and exports its products worldwide through a network of dealers. The pumps have excellent wearing qualities and are used for a wide range of applications in the fishing, abattoir, pet food, meat and wastewater industries.

Malcolm Thompson Pumps is proud to have been beeen the exclusive JS Maskinfabrik distributor in Australia since 1991.