Industries

Agriculture Chemical Yes Construction Food and Beverage Hire Manufacturing Yes Mining Oil and Gas Power Generation Pulp and Paper Water and Waste

ET Series

Features

  • Patented Toyo cutter fan at the bottom of the pump creates high agitating and excavation motion, sucking in sediments like sand and other materials continuously and at a high concentration, without clogging the strainer.

  • The shaft gland consists of the double SIC mechanical seal, giving excellent endurance for rugged use.

  • High chrome is used in key wear plates such as the impeller, suction cover and cutter fan.

  • Casing in spherical graphite iron.

  • Performance can be maintained for extended periods by adjusting the clearance between the impeller and the suction cover.

  • Incorporates thermal protector to prevent motor from burning.

  • Provides the most cost effective method of converting stationary material into a pumpable state.

  • Axial flow of liquid cooling the motor makes partial immerging possible.

  • Used in narrow channels where only a vertical discharge is possible.

  • One adjustable wear plate allows long lasting high performance.

  • Standard models allow liquid temperatures up to 40°C and PH levels between 4 and 9.5.

Applications


  • Sand, slurry band gravel transfer in civil, mining and industrial applications

  • Disposal of various slurry in mining and stone crushing plants

  • Desilting of sand and sludge at construction sites

  • Disposal of various slurries and water liquids in manufacturing plants and chemical factories

  • Scale and sludge pumping in steel mills

  • Slurries and sludge transport in concrete batching plants and ready-mix concrete factories

  • Dredging in ports, harbours and shipyards

Performance Curves

No Performance Curves Available.

Technical Specifications

Model Discharge Motor output Max capacity Max head Max solid
( mm) ( kW) ( m3/hr) ( m) ( mm)
ET-1 50 0.75 15 7.4 10
ET-2 50 1.5 24 10.7 10
ET-3 80 2.2 48 10 20
ET-5 80 3.7 60 15 20
ET-7.5-1 80 5.5 72 17 25
ET-7.5B-1 100 5.5 96 17 25
ET-10-1 100 7.5 96 20 25
ET-10H-1 100 7.5 84 27 14
ET-15 100 11 150 20 30
ET-20 100 15 120 27 30

Notes - Standard pumps are supplied with 10 metres of cable. - The following options are available at an extra charge: - Additional cable lengths - Pumps suitable for High Temperature duty with Motor installation "H" - Stainless Steel SS304 Nuts and Bolts

Dimensions

No Dimension Information Available.

Product Disclaimer: The product information and specifications on this website should be used as a guide only. The customer is responsible for ensuring the capacity and performance of the goods are sufficient and suitable for the customer's purpose. Malcolm Thompson Pumps takes no responsibility for errors or omissions in product features or specifications.