Industries

Agriculture Chemical Yes Construction Food and Beverage Yes Hire Manufacturing Yes Mining Oil and Gas Power Generation Pulp and Paper Water and Waste

KTV Series

Features

  • Anti-wicking cable entry

An anti-wicking block is provided at the cable entry of the pump. This unique feature protects the motor from ingress of water even if the cable sheath is damaged and the top of the cable is immersed in water.

  • Dual inside mechanical seal

The pump comes standard with a double mechanical seal. The seal is located completely within the oil chamber. This seal system does not rely on the pumped media for lubrication and cooling increasing the reliability and life of the seal.

  • OIL LIFTER (patent pending)

The OIL LIFTER stabilizes the mechanical seal by supplying oil to the top seal faces even if the lubricant in the oil chamber falls below the rated value. This is supplied standard in KTV pumps.

  • Motor protection device

Circle thermal protectors (CTPs) are built into its motor. The CTP will cut the motor circuit in the event of excessive heat build-up caused by blockage of the impeller or by other overloading factors.

  • Side channel - top discharge design

The benefit of this design is that water cools the motor as it flows past the inner motor housing. This will enable the pump to operate at low water levels for extended periods.

  • Aluminium alloy construction

Casing made of aluminium bodies and use of synthetic rubbers have reduced weight by over 10kg compared to fully cast iron pumps

Applications


  • General construction dewatering
  • Drainage in civil engineering and construction sites
  • Drainage water from sumps and basements
  • Water intake in irrigation
  • Pumping bentonite mixed water in foundation works (agitator type)
  • Draining water in mud or slurry (agitator type)

Performance Curves

Technical Specifications

 

Model Discharge (mm) Power (kW) Voltage (V) Cable (m) Max flow (L/s) Shut-off (m) Weight (kg) Max solid (mm) Rated current A (415V)
KTV2-8 50 0.75 415 20 5.3 15 12 8.5 1.8
KTV2-15 50 1.5 415 20 7 20 19.5 8.5 3.2
KTV2-22 50 2.2 415 20 8.7 24 23 8.5 4.2
KTV2-37H 50 3.7 415 20 8.3 34 35 8.5 7.4
KTV2-37 80 3.7 415 20 13.8 26.5 35 8.5 7.1
KTV2-55 80 5.5 415 20 14.8 35 46.5 8.5 10.6
KTV2-50* 50 2 415 20 6.7 20 27 8.5 3.8
KTV2-80* 80 3 415 20 11.7 22.5 41.3 8.5 6.1

  * Pumps have agitator to keep solids in suspension

Dimensions

Dimensions in mm                
Model D (mm) H (mm) A (mm) A1 (mm ) B (mm) B1 (mm) W1 (mm) d (mm)
KTV2-8 200 369 200 155 353 281 65 50
KTV2-15 240 396 240 187 392 310 80 50
KTV2-22 240 416 240 187 412 330 80 50
KTV2-37H 285 510 285 211 510 387 90 50
KTV2-37 285 510 285 211 510 387 90 80
KTV2-55 300 545 285 229 545 422 90 80
KTV2-50 250 454 250 192 450 368 120 50
KTV2-80 295 550 295 216 550 427 130 80

 

Product Disclaimer: The product information and specifications on this website should be used as a guide only. The customer is responsible for ensuring the capacity and performance of the goods are sufficient and suitable for the customer's purpose. Malcolm Thompson Pumps takes no responsibility for errors or omissions in product features or specifications.