For 99,98 % Drum Emptying

  • Less than 0.05 l residual amount left in 200 l drum
  • Reduction of cleaning and waste disposal costs
  • Stainless steel version can be used in hazardous area
  • Radial shaft sealing ring prevents intrusion of vapours and liquids into the coupling area
  • Description
  • Applications
  • Characteristics
  • Downloads

Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow, less than 0.05 l residual amount in 200 l drum is possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. It can also be used in hazardous areas.

All high-grade and dangerous media:
Petroleum, diesel, heating oil, hydraulic oil, engine oil, motor oil, gasoline, formic acid (85 %), ethyl glycol, petroleum, MEK (methyl ethyl ketone = butanone), octane, ethanol, methanol, butanol, acetan, toluene, isobutanol, propanol, xylene, urea solutions, white spirit

• Flow rate: max. 35 l/min1
• Delivery head: max. 8 mwc
• Viscosity: min. 1 mPas – max. 600 mPas
• Outer tube diameter: max. 41 mm
• Immersion length: 1000, 1200
• Materials outer tube: Stainless steel
• Media / Fluids: Fuels, Highly flammable media, Solvents, Petroleum products
• Seal: with mechanical seal
• Container: 1000 l IBC, 200 l drums

Copyright © 2024 Malcolm Thompson Pumps Pty Limited.