SDV Series
Heavy Duty Submersible Drainage Pump
- Made with light materials, such as aluminum and alloy
- A very light weight portable drainage pump
- High cooling efficiency
- High chrome cast iron impeller
- Description
- Applications
- Tech Specs
- Characteristics
The SDV series pump is a portable light drainage pump that pumps liquid in ordinary buildings and foundation works. The structural parts of the SDV pump are made of lightweight materials such as aluminum alloy, rubber, etc., which are suitable for handling on the construction site.
The small outer diameter of the pump allows it to be used in narrow spaces. The water is sucked from the bottom of the pump and discharged from the top through the side wall channel of the motor, which provides high cooling efficiency for the engine and allows the pump to work, usually even if the motor is exposed to the water. The high chrome cast iron impeller and rubber pump body are super wear-resistant. There is a large gap between the semi-open impeller and the pump body, so the impeller will not be easily stuck by mud or sand. The hose coupling could be installed vertically or obliquely to prevent the soft hose pipe from folding or bending.
- Building sites
- Civil engineering
- Basements or other utility pits
- Rainwater and mud water
- Capacity: up to 54 m3/h
- Head:up to 37 meters
- Power: Single phase 1.5kW(2HP)
- Three phase 1.5kW (2HP) to 5.5kW (7.5HP)
- Power supply:Single phase 230V±10%, 50Hz, 60Hz
- Three phase 400V±10% 50Hz
380V±10%, 60Hz - Insulation class: F
- Protection class: IP68
- Cable length: 8m
- Water temperature: up to 40°C
- PH: 6.5 to 8.5
- Max. water depth: 25m
